How to Measure for Tall Boots How to Measure for Tall Boots
Before you begin riding boot sizing, you’ll need a soft measuring tape and a piece of paper. For the most accurate results, have a helper take your measurements by following these easy steps:
1. Wear the breeches or riding tights and socks that you are most likely to wear with your boots.
2. Sit in a straight chair with your stocking feet flat on the floor and knees at a 90 degree angle.
3. For boot width, have a helper use a cloth measuring tape to measure your calf around its widest point.
Note: Do not add increments to your calf measurement. The leather of the tall boot will stretch over time until they break in. The boots should fit snugly and should be slightly difficult to put on. If the boots are too large when you purchase them, they will only become looser over time and will increase the risk of the boot dropping too much, resulting in too short a height.
4. For boot height, have your helper measure from the floor to the back of your knee.
Boot height is a matter of personal preference. Some riders prefer a very tall boot, while others prefer a shorter boot. In general, for field boots you’ll want to add 1 1/2 to 2 inches to your height measurement. For a moderately stiff dressage boot, you’ll want to add 1 1/4 to 1 1/2 inches. In addition to these recommendations, check the riding boot sizing chart on the ordering tab for your desired brand of boots to determine whether you should make any specific height adjustments.
If you’re choosing a tall boot that is made of very soft leather or that is boxy in cut near the ankle, allow for more drop to occur in the boot. If you want to end up with a boot that has the maximum height for your leg after the break-in phase, take the maximum amount of drop for the boot and add a bit to the height measurement. You’ll have an uncomfortable break-in process, but in the end, you’ll achieve maximum boot height.
Note: Styles in both field and dress boots that feature a Spanish top help to create an elongated look as up to 1 to 1 1/2 inches of curved leather is added to the outside of the top of the boot. A Spanish top is cut higher and more curved than a regular boot top.
5. Match your calf width and height measurements to the riding boot sizing chart pertaining to the brand of boot you wish to order.
If you’re considering zippered boots, look for a calf measurement that is as close to or a smidge over your measurement to avoid stressing the zippers. If your calf measurement is as little as 1/8 inch wider than the calf measurement listed for your expected size, you may want to consider the next size up or you may have problems with the boot zippers. If the next size up seems as though it will be too wide for your calf and the boot would be too loose, then consider another boot that will fit your leg better. It is not uncommon when choosing from stock tall boots for riders to consider all size charts and all manufacturers to find their optimal boot.
Shoe size pertains to your usual size for footwear. Some riders choose to go up a foot size if their desired boot height is not available with their regular size. Extra space in the foot can be taken up with an extra foot bed, gel sole or air cushion.
Note: For boots that are offered in whole foot sizes, factor the type of sock you plan to wear into your decision. For example, if you normally wear size 7 1/2 shoe but the boot you wish to order is offered in whole sizes, the thickness of your socks will determine the correct size to order. For heavy, thick socks, you would choose a size 8; for average, thin socks you would choose a size 7.
Related Articles: How to Check the Fit of New Tall Boots How to Care for Tall Boots How to Check the Fit of Field Boots How to Check the Fit of New Tall Boots
Here are some overall points to consider about the fit of your new tall riding boots:
Field boots are designed to drop, soften and crease around your ankle to allow for proper leg positions while riding. The amount of drop depends on the softness of the leather and on the boot cut. Because of the intended drop, it is important that new boots rise high enough at the knee initially, though the final height of your field boots will depend in part on the decisions you made when you ordered the boots. Refer to
How to Measure for Tall Boots if you need help with sizing.
Dressage boots are crafted of stiffer leather than field boots and are not designed to drop much or soften at the ankle. They should, however, stand high enough at the knee to help achieve an elegant, elongated leg in the saddle.
All tall boots require an uncomfortable break-in time to get the final, proper riding boot fit. Dover Saddlery offers an array of products to help you get used to your new boots, from slippery
Zocks™ that make boots easier to slide on, to Effax® Boot Miracle Stretch Spray for extra tight spots in the calf. As your boots break in, they will become more comfortable to wear.
Steps to Assess Tall Riding Boot Fit Follow these steps to be sure your new tall boots fit properly:
1. Put on the breeches or riding tights and socks that you will wear with your boots.
2. Pull on or zip up your boots. Initially, they should be difficult to tug on (and off). If your boots have zippers, you should be able to zip them all the way up and snap the closure at the top while standing. The boots should feel uncomfortably snug around your calf without cutting off your circulation. For riders with wide calves, a pair of wide calf riding boots may provide a more comfortable riding boot fit.
Note: If the riding boot fit is too loose, when it breaks in and stretches, the boots will develop deep folds around your ankle that may press into your skin and cause friction. Also, if the boot is too loose, it will drop too much and be too short in height.
3. Check the height. For field boots where you want the maximum height after break-in, the front of the boot should rise to the middle of your kneecap. If you cannot see the kneecap at all, the boots are too tall. For dressage boots, the front of the boot should rise to just under your kneecap.
Note: The boots will seem uncomfortably tall and will crease slightly at the top when you bend your knee, as shown in the photo. Wearing the boots will be uncomfortable during your first few rides.
Note: The crease will disappear when the boots drop. You can see how high your riding boot fit will appear after the break-in phase by placing a heel lift in the footbed to raise your leg inside the boot. For more comfort at the back of the knee, some people choose to ride in a heel lift until the boot finishes breaking in.
4. Check the feel of the footbed. Make sure that you will be comfortable keeping the ball of your foot on a stirrup pad. If you have ordered a shoe size that is a little larger than you would normally wear in order to obtain a slightly taller boot height, place an air cushion, gel sole or other padded footbed in the shoe of the boot to take up extra space.
Related Articles: How to Measure for Tall Boots How to Care for Tall Boots How to Clean How to Clean Your Riding Boots
Regularly give your boots a thorough cleaning, conditioning or shining using only products and brushes designed specifically for boot leather. Do not use glycerin soap, a tack cleaner or a household cleaner on any part of your boot or its sole.
You'll want to wipe dirt, manure and horse sweat from the surface of your boots after every ride using a barely damp cloth or sponge. If there's dirt on the welt stitching and zipper, try using a soft-bristled brush. Use a stiff-bristled brush to remove caked material from outsoles. Keep in mind that any contaminants left on boot leather leech moisture, promote cracking and weaken or rot the stitching. Additionally, hardened dust and dirt from previous rides cause premature wear and abrasions, and grit in zipper teeth can prevent proper functioning. If you wear spurs, unbuckle the spur straps to clean the leather underneath them.
You'll want to use a soft rag to apply a boot cream or boot polish to the clean, dry leather. Let the product absorb into the leather for several minutes and avoid putting polish on zipper teeth. Buff boots with a polishing brush followed by buffing with another clean rag until the boot is shiny. Be sure to use a gentle brush to remove polish from welt stitching. Always check to see what kind of polish and brush your boot manufacturer recommends. Some manufacturers supply products that work best on their boot leather.
For thorough zipper care, vacuum or brush away debris before applying a thin coat of Zipper-Ease®, the stick lubricant that rubs on like a crayon and extends the life of your zippers.
How to Care How to Care for Tall Boots
Regular cleaning and proper care of your field, dress or dressage boots can extend their life and keep them looking new. Follow these guidelines to keep your favorite boots in great shape. To browse our entire selection of tall boots online, click
here.
1. Wipe dirt, manure and horse sweat from the surface of your tall riding boots with a barely damp cloth or sponge after every use. These contaminants leech moisture from the leather and can rot the stitching. Dust and dirt can cause abrasions and cracking.
2. Use cleaning and conditioning products designed specifically for boots, rather than using a tack cleaner. You can choose from a range of products designed to clean and shine boots
here. Never use household cleaners on your boots as they may permanently damage the leather. It is best to check your boot manufacturer’s guidelines for the appropriate product. When it comes time to shine your tall riding boots, apply a boot cream or boot polish to a clean boot with a soft rag, then buff with a boot polishing brush followed by another clean rag until the boot is shiny.
3. Protect your boots on wet days by using overshoes such as
Tingley Rubbers. Be sure to remove overshoes before storage. Condensation forms between the boot, your foot and the overshoe when you wear these covers, so air must be allowed to circulate and dry the sole of the boot to prevent mildewing and to preserve the integrity of the stitching afterward. If your tall riding boots get wet, allow them to dry completely and naturally at room temperature before wearing them again. Never place wet leather boots near a heat source such as a radiator, fireplace, wood stove or space heater.
4. Insert boot trees in your tall boots when not being worn to maintain their shape and the life of the zippers.
Cedar Boot Trees help repel moisture and pests, whereas
plastic boot trees are the most economical option.
Note: Allow perspiration inside the boots to dry naturally before inserting plastic trees. As with all leather products, your tall riding boots should be stored in a temperature-controlled environment that is free from rodents. Extreme heat and cold temperatures are detrimental to leather.
Improperly stored tall riding boots without boot trees. 
Properly stored tall riding boots with boot trees inserted. How to Care for Boot Zippers - Ensure your leg measurements do not exceed the size prescribed for your brand of boots. This is the key to the longevity of your boot zippers.
- Pull the zipper down completely before you slip your foot into or out of the boot.
- Never force a zipper to close.
- Remove dust or sand from the zipper teeth using a toothbrush or similar tool. Add just a bit of water to the brush if you need to remove salt from the zipper.
- Use Zipper Ease® to extend the life of your zippers and make them zip smoothly. This is an easy-to-use stick lubricant that rubs on like a crayon to keep metal or plastic zippers working smoothly.
Related Articles: How to Check the Fit of New Tall Boots How to Measure for Stock Tall Boots Additional Information
"Tall boots" for the English riding disciplines is a broad term that encompasses field, dress and dressage boots. Each boot style nods to the tradition of the equestrian sport, offers details that reflect current fashion trends, and most importantly, provides specific functionality to the rider. Field boots are typically made of leather with some degree of suppleness and with laces at the front of the ankle. This type of boot allows the rider to achieve a correct heels-down foot position for jumping, enjoy the flexibility to ride in shorter stirrups and experience a close contact feel at the inside calf.
Dress boots, which present a more formal appearance, are also as soft and supple as field boots, but they do not have laces at the ankle. Dressage boots are much stiffer than field or dress boots. Constructed with a stiffener up the back and offered in leather with various degrees of stiffness, a dressage boot should not drop much at the ankle. The design supports the rider's relatively flat foot position in the stirrup and a long, elegant leg position, which provides maximum area contact with the horse's sides. Dover Saddlery offers a wide selection of tall boots from all the leading brands, from entry-level to premium price points, and from the most classic to the most fashionable. Can't find a stock boot that's just right for you? Custom tall boots are available here, too.
Our Guarantee 100% Satisfaction Guarantee
The Easiest and Best Guarantee in The Business
Shop with 100% confidence at Dover Saddlery. If something doesn’t fit you or your horse, return your original purchase within a year, and we’ll make it right with a refund, exchange or replacement.
Our experience as riders and horse owners ourselves is that in most situations a year’s time is fair enough to evaluate proper fit and function. PLUS: For manufacturer’s defects, we’ll extend the manufacturer’s warranty to a maximum of 24 months, regardless of their individual policies. (AND: Manufacturer warranties longer than 24 months will be honored and supported by us as well up to the length of those warranties).
Exceptions: Safety items such as helmets and protective vests may only be returned within 30 days, with their original tags intact. Saddles and riding boots may be returned within the one year period, but are subject to a prorated refund based on usage. Used saddles may be returned for 30 days only. For everyone’s protection, treats and vet meds which have been opened are not returnable, and returned blankets must clean and free of debris. Underwear is not returnable or exchangeable.
Special Conditions
To protect all customers and ensure that every return or exchange is handled fairly, we may require a receipt or decline a return in these situations:
• Item was not purchased directly from Dover Saddlery. (It was purchased at a used tack sale or from a retailer or online seller other than Dover Saddlery.)
• Item is missing a label or has been defaced.
• No receipt and no valid identification in our stores.
• Item is wet, dirty or contaminated, or until it has been cleaned. (For health and safety reasons, we cannot accept returns on used, defective or poorly fitting blankets if they are UNWASHED.)
• Item has been lost, stolen, damaged, or misused.
• On rare occasions, based on the nature of prior transactions.
• Supplements have been opened or used.
• Multiple returns of the same item.
• Personalized items may not be returned unless defective.
Security Guarantee
Dover Saddlery understands your concerns regarding online security. We share in your concerns and therefore work hard with experts in the field to maintain a highly secure ordering environment. Along with our comment to security, we offer you a Secure Order Guarantee - this gives you 100% protection for your credit card transactions on Doversaddlery.com.
Our Secure Order Guarantee means that you will never have to pay any money related to unauthorized charges to your credit card account, as long as those charges are a direct result from a transaction on Doversaddlery.com.
How it works: If you experience credit card fraud, the Fair Credit Act specifies that your credit card company can hold you liable for no more than $50.00 in fraudulent charges to your account. Our Secure Order Guarantee will reimburse you for any amount up to $50.00 billed to you by your credit card company for unauthorized charges to your account, if those charges result from an order you placed with Doversaddlery.com. For this protection you must promptly notify your credit card company of fraudulent charges and follow their procedures as outlined in your credit card agreement.
