Neue Schule Tranz Angled Lozenge Loose Ring Bradoon
Neue Schule Tranz Angled Lozenge Loose Ring Bradoon
The Neue Schule Tranz Angled Lozenge 14mm Bradoon has a Salox® Gold mouth with a center lozenge set at a 20° angle. This bit encourages consistent contact and high responsiveness.
Read more…Buy Online – Ship To Store
NEW! Place your order online and ship directly to the Dover Saddlery retail store of your choice! You will be contacted by a store associate in approximately 7-10 business days when all of your items are ready for pick up. Standard shipping is FREE! You will be responsible for any Oversize/Overweight fees which will be visible during the checkout process. Ship to Store orders are not eligible for expedited shipping.To place your ship to store order, simply add items to cart and begin the online checkout process. Select a Dover Saddlery retail location for your 'Shipping Information'. You will be asked to provide your name and phone number so we can contact you when the items are ready for pick-up.
Curbside pick-up is available. Please coordinate with the store associate when you are notified that your item is available for pick-up.
Questions? Call us at 800-406-8204.
Reserve Online-Pick Up at Store - for FREE!
Chat with us now to reserve this item at your local store! We will check to make absolutely sure the product is available and reserve it for you to pick up as soon as today. If the item is not available at your store, we will ship it there for FREE and you will be contacted when it is available (approximately 7-10 business days).
- Click on the Live Chat button below.
- Provide your desired store location, item, size, color and quantity.
- We will check your local store's inventory to make absolutely sure that the product is available.
Live Chat
Need to find a store near you? See all our store locations.
Rambo Blanket Trade-In
The Neue Schule Tranz Angled Lozenge Loose Ring Bradoon with 14mm Salox® Gold mouth is ergonomically designed for comfort and communication. A popular dressage mouthpiece, it encourages a true, consistent contact and a higher level of responsiveness. The rounded center lozenge is set at a 20° angle to activate feel over the tongue. When contact is taken, the lozenge rolls gently down to contour smoothly over the tongue’s thicker, less sensitive center, thereby enabling clearly defined rein aids.
Arms are slightly curved for comfort and oval shaped to take up less room between the tongue and upper palate than circular mouthpieces. This design may help to create a larger upper airway, enhancing the horse’s ability to breathe and swallow. Stainless steel rings are 55mm.
Why choose a Neue Schule bit?
Neue Schule’s brand philosophy is, “That which is good for the horse is all that matters.” Their philosophy carries through into all aspects of engineering and producing precision bits. You can rest assured that your Neue Schule bit is designed to promote a harmonious partnership between you and your horse.
Neue Schule’s biologically inert mouthpiece metal, Salox Gold®, is designed specifically for horses to maintain the natural warmth and softness of a horse’s mouth. By combining three scientific approaches, Salox supports pacifying and quietening the mouth:
1) High thermal diffusivity (warm). The bit rapidly reaches and maintains mouth temperature so that the mouthpiece does not feel cold for long.
2) Just soft enough. The bit material is softer than tooth enamel to ensure that if a horse bites it, the force is safely, comfortably absorbed into the material rather than reflected onto the teeth. It’s also just soft enough to dampen acoustic waves that would otherwise ring into the horse’s jaw.
3) Neutral taste. Salox Gold is low in bioactivity. It promotes a quiet, receptive mouth by discouraging the horse to explore the bit for taste. The addition of aluminum in the metal, which forms an insoluble alumina (oxide) coating, traps the metal ions that would create taste.
In-house scientists, engineers and riders conduct all of the brand’s research and development. Neue Schule bits are ergonomically designed using the latest in engineering and CAD technologies. Sizes range from 4" to 6½". Individual molds are made for every ¼" increment to ensure anatomically correct sizing.
Neue Schule Bits are the Official Bit of U.S. Equestrian.
Imported.
Manufacturer Restricted Price Product: Count on Dover Saddlery for the best quality, value and price possible. However, some of our manufacturers restrict advertised selling prices and prevent us from advertising discounts. For other items, some manufacturers allow us to offer and advertise a discount on a limited basis. Therefore, some products are not eligible for discounts.
To find the right size bit for your horse or pony, consider both the length of the mouthpiece and the width of the mouthpiece in combination with the conformation of your horse's mouth.
Length of the Mouthpiece
Bit length corresponds to the width of your horse's mouth. This measurement is usually provided in inches and fractions of an inch, such as 5 inch or 5 1/2 inch.
When attached to an appropriately adjusted bridle, a bit should rest comfortably at the corners of a horse's mouth and shouldn't press too hard against a horse's face. This would indicate the bit length is too short, and the horse may feel pinching at the sensitive corners of his mouth.
Conversely, if you see a 1/2 inch or more on each side between the lips and bit rings, the bit is too long. A bit that is too long can slip sideways in a horse's mouth, becoming ineffective and causing soreness.
The specific type of bit you choose will influence slightly the desirable bit length. A full cheek snaffle, Pelham or elevator bit should sit snuggly next to your horse's cheeks, but should not squeeze or pinch. For a loose ring snaffle or any bit with moveable rings, make sure that your horse's lips completely clear the bit ring holes by 1/8 inch on each side. Otherwise, the horse's skin can become pinched into the holes as the action of the loose rings works with the reins.
Measure your horse's mouth to determine the length of bit required in either of two ways:
- A Bit Sizer, simple but accurate, is a plastic device that measures in inches and corresponds to bit sizes. Take the reading as you would on a ruler. Slide the Bit Sizer across the horse's tongue, resting it against the corners of his mouth. The end piece should rest against one cheek comfortably. At the other side, read the inch measurement at the corner of the mouth.
- Use a piece of string in place of a Bit Sizer if your horse will cooperate. Mark the spots on the string that meet the corners of the horse's mouth, then lay the string against a ruler to obtain your bit length measurement.
As described previously, depending on the type of bit you're selecting, you may want to add 1/4 to 1/2 inch to your measurement.
Width of Mouthpiece
Bit width refers to the bit circumference at the widest part of the mouthpiece. This measurement may be in inches or millimeters.
For most horses, the thinner the bit, the more severe its action is on the horse's mouth because the pressure from the bit is exerted on a narrower surface. Similarly, in general, the thicker the bit, the more gentle its action on the horse's mouth because the pressure is distributed over a wider surface. With this in mind, also consider the conformation of a horse's mouth when choosing bit width. A bit should never be too thick in relation to the space in a horse's mouth.
The height of the palate (roof of the mouth) plus the thickness of the tongue determines the amount of space available for the bit. You can usually identify the conformation of the horse's mouth by prying open the side of the lips. A small or average sized tongue lies below or level with the bars of the mouth; a thick tongue rises above the bars or spills over the bars and between the teeth.
Your equine dentist, veterinarian or a knowledgeable trainer can help you determine whether your horse's palate is normal or high, which could allow for a thicker bit, or very low, which could reduce the thickness of the bit that may be used.
Clean your horse's bit routinely after every ride. Any dried spit or food particles left to harden on a bit become abrasive and uncomfortable to your horse's mouth. With regular cleaning you're not only ensuring your horse's comfort, you�re also ensuring that the moving parts of the bit, such as the cheek or ring joints or center lozenges, function as smoothly as intended.
Give the bit a good rinse with water and wipe it thoroughly with a clean rag. Alternatively, use flavored Horse Amour® Bit Wipes. These pre-moistened, disposable wipes remove grime quickly and leave a pleasant taste for your horse to enjoy at the next bridling.
Over time, bits may become tarnished from use and exposure. Use a non-toxic, non-acidic metal polish such as Herm Sprenger® Diamond Paste to remove tarnish gently. Developed for use on bit mouthpieces and all types of metal, HS Diamond Paste helps prevent tarnish from recurring. If you use any other type of metal polish, be sure to wash the bit thoroughly with water to remove any trace of the product.
