Skip to Main Content Skip to Footer Content

Equi-Star™ AW Field Boot

Images:
0038682_1.jpg Equi-Star™ AW Field Boot
Colors/Options: Xw

Equi-Star™ AW Field Boot

The EquiStar™ AW Field Boot requires no maintenance. This synthetic field boot is a great choice for a first pair of tall boots and a convenient option to have on hand when you don't want to get your leather boots dirty. It's classically styled with contoured topline, toe cap, laces and dual spur rest. Read more…
Item #: X1-38682
$89.95
Helpful Information
Tall Boot Measuring
Sizing Info
Our Guarantee
A maintenance-free, all-weather boot, the EquiStar™ AW Field Boot makes a great substitute when you don't want to get your leather show boots dirty. This synthetic field boot is properly styled with a contoured topline, toe cap, laces and dual spur rest, and has a moisture-wicking lining for comfort. It stands up to inclement weather and wipes clean with a cloth. Full back zipper allows for easy on and off.



How to Measure for Tall Boots
You'll need a helper and a cloth measuring tape to take accurate measurements.

  • Wear the breeches and socks that you're most likely to wear with your new boots.
  • Sit in a straight chair with your stocking feet flat on the floor and knees at a 90 degree angle.
  • For calf width, have your helper measure the circumference of your calf at its widest point.


  • Note: Do not add increments to your calf measurement. Boot leather stretches as it breaks in. New boots should fit snugly and should be slightly difficult to put on. If the boots are too large when you purchase them, they will only become looser over time and will increase the risk of the boot dropping too much resulting in a shortened height.

  • For boot height, have your helper measure from the floor to the back of your knee.

  • Boot height is a matter of personal preference. Some riders prefer a very tall boot, while others prefer a shorter boot. In general, for field boots you'll want to add 1 1/2 to 2 inches to your height measurement. For a moderately stiff dressage boot, you'll want to add 1 1/4 to 1 1/2 inches. Also, check the riding boot size chart on the ordering tab for your desired brand of boots to determine whether you should make any specific height adjustments.



    Note: Styles in both field and dress boots that feature a Spanish top help to create an elongated look as up to 1 to 1 1/2 inches of curved leather is added to the outside of the top of the boot. A Spanish top is cut higher and more curved than a regular boot top.



  • Match your calf width and height measurements to the riding boot sizing chart pertaining to the brand of boot you wish to order.

If you're considering zippered boots, look for a calf measurement that is as close to or a smidge over your measurement to avoid stressing the zippers. If your calf measurement is as little as 1/8 inch wider than the calf measurement listed for your expected size, you may want to consider the next size up or you may have problems with the boot zippers. If the next size up seems as though it will be too wide for your calf and the boot would be too loose, then consider another boot that will fit your leg better. It is not uncommon when choosing from stock tall boots for riders to consider all size charts and all manufacturers to find their optimal boot.

Shoe size pertains to your usual size for footwear. Some riders choose to go up a foot size if their desired boot height is not available with their regular size. Extra space in the foot can be taken up with an extra foot bed, gel sole or air cushion.

Note: For boots that are offered in whole foot sizes, factor the type of sock you plan to wear into your decision. For example, if you normally wear size 7 1/2 shoe but the boot you wish to order is offered in whole sizes, the thickness of your socks will determine the correct size to order. For heavy, thick socks, you would choose a size 8; for average, thin socks you would choose a size 7.

How to Check the Fit of New Tall Boots




Here are some overall points to consider about the fit of your new tall riding boots:

Field boots are designed to drop, soften and crease around your ankle to allow for proper leg positions while riding. The amount of drop depends on the softness of the leather and on the boot cut. Because of the intended drop, it is important that new boots rise high enough at the knee initially, though the final height of your field boots will depend in part on the decisions you made when you ordered the boots. Refer to How to Measure for Tall Boots if you need help with sizing.

Dressage boots are crafted of stiffer leather than field boots and are not designed to drop much or soften at the ankle. They should, however, stand high enough at the knee to help achieve an elegant, elongated leg in the saddle.

All tall boots require an uncomfortable break-in time to get the final, proper riding boot fit. Dover Saddlery offers an array of products to help you get used to your new boots, from slippery Zocks™ that make boots easier to slide on to Boot Stretch Spray for extra tight spots in the calf. As your boots break in, they will become more comfortable to wear.

Steps to Assess Tall Riding Boot Fit

Follow these steps to be sure your new tall boots fit properly:

1. Put on the breeches or riding tights and socks that you will wear with your boots.

2. Pull on or zip up your boots. Initially, they should be difficult to tug on (and off). If your boots have zippers, you should be able to zip them all the way up and snap the closure at the top while standing. The boots should feel uncomfortably snug around your calf without cutting off your circulation. For riders with wide calves, a pair of wide calf riding boots may provide a more comfortable riding boot fit.

Note: If the riding boot fit is too loose, when it breaks in and stretches, the boots will develop deep folds around your ankle that may press into your skin and cause friction. Also, if the boot is too loose, it will drop too much and be too short in height.

3. Check the height. For field boots where you want the maximum height after break-in, the front of the boot should rise to the middle of your kneecap. If you cannot see the kneecap at all, the boots are too tall. For dressage boots, the front of the boot should rise to just under your kneecap.

Note: The boots will seem uncomfortably tall and will crease slightly at the top when you bend your knee, as shown in the photo. Wearing the boots will be uncomfortable during your first few rides.



Note: The crease will disappear when the boots drop. You can see how high your riding boot fit will appear after the break-in phase by placing a heel lift in the footbed to raise your leg inside the boot. For more comfort at the back of the knee, some people choose to ride in a heel lift until the boot finishes breaking in.

4. Check the feel of the footbed. Make sure that you will be comfortable keeping the ball of your foot on a stirrup pad. If you have ordered a shoe size that is a little larger than you would normally wear in order to obtain a slightly taller boot height, place an air cushion, gel sole or other padded footbed in the shoe of the boot to take up extra space.




For more assistance or to request a catalog, call 1-800-989-1500 to speak with a Dover Saddlery product advisor, or stop by any of our retail stores. Visit DoverSaddlery.com for a complete store listing and the full product offering.


Related Articles:
How to Measure for Tall Boots
How to Care for Tall Boots
For proper fit, Dover recommends that you take the time to determine your measurements before you order. Have another person measure your leg for the most accuracy. Properly fitted tall boots will, at first, be uncomfortably tight around the top of the boot and should come up into the back of your knee. They should be difficult to pull on and off or zip up. As they break in, they will drop comfortably around your leg.

When referring to tall boot sizing charts, it is important to keep in mind that all tall boots are measured at the widest part of the calf, but each brand measures height differently.

How to Measure for Tall Boots:

1. Wear the clothing (breeches, tights, socks, etc.) you are most likley to wear with your boots.
2. Sit in a straight chair with feet flat on the floor and knees at a 90 degree angle.
3. Measure calf around the widest part, and measure height from the floor to back of the knee.
4. Add 1 1/2" - 2" to measured height to allow for drop as your boots break in.

For individual size charts and meaurements, please refer to the "Size Guide" link that appears on the product page.

Click Here for more information.