Skip to Main Content Skip to Footer Content

Circuit® by Dover Saddlery® Pony Saddle

Colors/Options: Oakbark

Circuit® by Dover Saddlery® Pony Saddle

Nameplate ships separately from order

The Circuit® by Dover Saddlery® Pony Saddle is correctly balanced to help the young rider develop a correct position. This sensibly priced pony saddle is crafted in durable, full-grain leather.

Read more…
 
Item #: X1-15209
$800.00
Ships in 2-5 Business Days
Helpful Information
How to Clean
Nameplate Attachment Instructions
Our Guarantee

Proportioned for young riders, the Circuit® by Dover Saddlery® Pony Saddle makes a great first saddle at a sensible price. A wide variety of sizes are available to best suit your young rider and pony. This saddle is correctly balanced, has padded flaps and is crafted in durable, full-grain, rich leather. Polymer tree with lifetime tree warranty; foam panels.


Imported.


How to Clean Your Leather Saddle
Care for your saddle properly to ensure it can provide years of service.

After every ride, wipe perspiration and footing dust from your saddle with a barely moistened rag. Pay particular attention to removing grime from the billet straps. These critically important straps are the most likely area of your saddle to wear first as they are exposed to horse sweat and are always placed under great pressure during use. They may require more frequent conditioning than other parts of your saddle.

Once weekly, clean and condition all leather surfaces of your saddle using either the traditional glycerin soap method or a specially formulated leather cleanser. The economical glycerin soap method of cleaning involves wiping your saddle with a moistened sponge to remove dust and dirt. Rub hard to remove grime. When the leather feels smooth and clean, rub a nearly dry sponge or rag against the glycerin soap bar. Apply a thin layer of glycerin soap (no suds during this step) to your leather to seal its pores and keep it soft, but not sticky.

Newer methods of cleaning your saddle involve convenient and easy-to-use tack cleaning and conditioning products; follow the manufacturers’ label instructions on any product you choose. Almost every tack manufacturer has a recommendation or product preference for cleaning and conditioning its saddles, and some manufacturers produce their own. Additionally, some suede, buffalo or patent leather may require special care according to the saddle maker. Always follow saddle manufacturer’s guidelines when considering commercial leather cleaners and conditioners.

One-step leather cleaners also condition your leather as you wipe away grime. Two-step cleaners usually advise following cleansing with a conditioner that will soften and protect the leather.
How to Attach a Nameplate to a Halter, Bridle, Martingale or Breastplate

Required Tools: will need a leather hole punch, hammer and pencil.

Steps:
1. Unwrap your nameplate and identify the rivets as having two posts and two caps.
2. Center the plate where you would like it ; mark its holes with pencil.
3. Use the hole punch centered on the pencil marks. A good quality hole punch with appropriate pressure applied should be able to penetrate even thick leather halters.
4. Push the rivet posts through the back of the tack so the posts are pointed toward you.
5. Put the nameplate on rivet posts.
6. Place rivet caps onto the posts, and tap the caps with a hammer.

Note: If you do not feel comfortable installing your own nameplate, we are happy to help. Bring your plate and tack into your local Dover Saddlery store for assistance. Your local leather repair professional or cobbler may also be able to assist you.