Skip to Main Content Skip to Footer Content

Acavallo® Sensitive Bit

Acavallo® Sensitive Bit Premier icon
Images:
Acavallo® Sensitive Bit 0010963_1.jpg 0010963_2.jpg 0010963_3.jpg 0010963_4.jpg 0010963_5.jpg

Acavallo® Sensitive Bit

FREE RETURNS  on this item!

The Acavallo® Sensitive Bit isn't heavy or cold like metal bits. It allows for a soft, yet secure communication with the horse. Preferred by some riders for schooling young horses and for the correction of difficult horses.

Read more…
Item #: X1-010963
$55.00
Size Chart
Ship to your local store
Reserve & pick up in store
Helpful Information
How to Clean
How Bits are Measured
Our Guarantee

Horses love the Acavallo® Sensitive Bit for many reasons. Made of an innovative, hypoallergenic plastic material over an integrated, flexible steel cable reinforcement, this bit is neither heavy nor cold like metal bits. It allows for a soft, yet secure communication with the horse.

Some riders select the Sensitive Bit for the schooling of young horses and for the correction of difficult horses. Features include:

– Slightly arched and flattened mouthpiece. This ensures that pressure on tongue, bars and corners of the mouth is distributed evenly.

– One-piece of design mouthpiece and rings. This prevents a one-sided squeezing or pinching of tongue or bars, and can help reduce painful irritations to the horse’s palate by eliminating the “nutcracker” effect.

The overall design of this bit can help enhance confidence of the horse in the rider’s hands because of its quiet and comfortable positioning in the mouth, which helps the horse to find its own balance.


Made in Italy.




Manufacturer Restricted Price Product: Count on Dover Saddlery for the best quality, value and price possible. However, some of our manufacturers restrict advertised selling prices and prevent us from advertising discounts. For other items, some manufacturers allow us to offer and advertise a discount on a limited basis. Therefore, some products are not eligible for discounts.
To clean a bit with a plastic or polymer mouthpiece, wash it in warm water using a mild soap only if needed. Rinse the bit thoroughly with running water, making sure to remove any soapy residue. Use a soft towel to dry the mouthpiece and buff the cheeks or rings.
How Bits Are Measured
To find the right size bit for your horse or pony, consider both the length of the mouthpiece and the width of the mouthpiece in combination with the conformation of your horse's mouth.

Length of the Mouthpiece
Bit length corresponds to the width of your horse's mouth. This measurement is usually provided in inches and fractions of an inch, such as 5 inch or 5 1/2 inch.

When attached to an appropriately adjusted bridle, a bit should rest comfortably at the corners of a horse's mouth and shouldn't press too hard against a horse's face. This would indicate the bit length is too short, and the horse may feel pinching at the sensitive corners of his mouth.

Conversely, if you see a 1/2 inch or more on each side between the lips and bit rings, the bit is too long. A bit that is too long can slip sideways in a horse's mouth, becoming ineffective and causing soreness.

The specific type of bit you choose will influence slightly the desirable bit length. A full cheek snaffle, Pelham or elevator bit should sit snuggly next to your horse's cheeks, but should not squeeze or pinch. For a loose ring snaffle or any bit with moveable rings, make sure that your horse's lips completely clear the bit ring holes by 1/8 inch on each side. Otherwise, the horse's skin can become pinched into the holes as the action of the loose rings works with the reins.

Measure your horse's mouth to determine the length of bit required in either of two ways:
  • A Bit Sizer, simple but accurate, is a plastic device that measures in inches and corresponds to bit sizes. Take the reading as you would on a ruler. Slide the Bit Sizer across the horse's tongue, resting it against the corners of his mouth. The end piece should rest against one cheek comfortably. At the other side, read the inch measurement at the corner of the mouth.
  • Use a piece of string in place of a Bit Sizer if your horse will cooperate. Mark the spots on the string that meet the corners of the horse's mouth, then lay the string against a ruler to obtain your bit length measurement.

As described previously, depending on the type of bit you're selecting, you may want to add 1/4 to 1/2 inch to your measurement.

Width of Mouthpiece
Bit width refers to the bit circumference at the widest part of the mouthpiece. This measurement may be in inches or millimeters.



For most horses, the thinner the bit, the more severe its action is on the horse's mouth because the pressure from the bit is exerted on a narrower surface. Similarly, in general, the thicker the bit, the more gentle its action on the horse's mouth because the pressure is distributed over a wider surface. With this in mind, also consider the conformation of a horse's mouth when choosing bit width. A bit should never be too thick in relation to the space in a horse's mouth.

The height of the palate (roof of the mouth) plus the thickness of the tongue determines the amount of space available for the bit. You can usually identify the conformation of the horse's mouth by prying open the side of the lips. A small or average sized tongue lies below or level with the bars of the mouth; a thick tongue rises above the bars or spills over the bars and between the teeth.

Your equine dentist, veterinarian or a knowledgeable trainer can help you determine whether your horse's palate is normal or high, which could allow for a thicker bit, or very low, which could reduce the thickness of the bit that may be used.